All posts by jnorsen

Job Story – Tray/Lid for Candle Vase

plastic stack tray case study

“The aesthetics, Security, and Impact resistance of the packaging were all equally as important to the client as price.”
We were up for the task!

  • Market: Retail/Craft
  • Product: Tray/Lid
  • Application: Secure display packaging
  • Tooling: New
  • RFQ Data: Design and Create tooling for accessible, secure, impact resistant Tray/Lid integrate into open face box design.
  • Capacity: Single product Tray/Lid per box
  • Material: PET
  • Orientation: Candle vase upright on base. The Candle must be physically accessible for touch and smell by consumer.
  • Security: Product must be secure in packaging.
    Cannot be removed from view opening
  • Stacking: Two tier pallets stacked for transit

This product required special attention to accessible display, allowing the consumer to touch, and smell the product without removing it from, or destroying packaging. In addition, the packaging had to support the weight of a second pallet for transit, and efficient warehousing, while meeting the criteria of a 10 drop impact test.

Our retail packaging products represent the best in Design, Innovation, Compliance, and timely execution of our resources. We strive to manage and direct all of these facets while delivering high quality solutions in a very time sensitive environment. When a project needs packaging expertise, has zero room for error, and deadlines in place to keep production and planning in full swing: Our team Shines!

Recently, a Manufacturer of Artisan Candle products, contacted us with a project, requiring packaging for a high volume retail customer. The project focused on a tray/Lid design that would hold, protect, and transport a glass candle vase within an open face cardboard container. The challenges of the project surrounded the clients need to have the product fully accessible to the consumer for touch, and smell, while at the same time being safely confined by the packaging it is shipped, and displayed in.

Not only were the requirements of the client a challenge, but the distributor added a quality specification requiring the packaging to support 2 tiers stacking on pallets for transport, while surviving 10 individual drop/impact tests without breakage.

We 1st received sample vases, and plotted the external geometry. Once this was done we worked with the client to determine the proper sizing of the cardboard container to maximize pallet stacking efficiency, and allowable opening for product access.

Several design models were tested for impact resistance and part security before finalizing the winning design.

With all design and machining capabilities offered in-house, we were able to order tool material, and begin cutting tooling immediately upon receipt of design approval.

After final design approval, we have a completed tool ready for final trial, and set up.

Completed tooling is set up for initial test fit, and die alignment. Material is run for engineering and quality evaluation.

Completed Sample parts are tested for fit, finish, and off for performance testing. The design criteria required all aspects of packaging be examined and tested, including placement, and stacking of pallets for transport.

In addition to the structural and dimensional requirements, the product also undergoes a final aesthetic review to ensure all marketing values are met before release to retail floor space.

We Understand!

Packaging design directly impacts: efficient manufacturing process, assembly, quality, distribution capability, sustainability and purchasing behavior. It has the power to enhance user satisfaction with the product, which in turn enhances brand preference and repeat purchases. Packaging design has a direct impact on costs and revenues in both CJK’s and our client’s operations.

Have a Packaging Problem?

Contact Us for a packaging solution. Our award winning engineering team has over 25 years of thermoforming and package design experience. We are your Trusted Solutions Provider.

Tray concept diagrams

Job Story – Process Stack Tray

“Understanding the consequences for poor design, or late delivery is catastrophic to the end user, unacceptable to us, and our acting clients.”
We were up for the task!

Market: Industrial/Automotive
Product: Tray
Application: Industrial: Process/Transport
Tooling: New
RFQ Data: Design, and Create tooling for cavity specific in-process / transport trays.
Material: HIPS (Anti-Static)
Stacking: Stack Only – No Part Contact
Capacity: 20Pc per tray .2oz weight per part
Orientation: Part place “Up” dual locators
PO for Tooling: Day 1
Design Criteria: Day 4
Design/Approval: Day 8
Tool Completion: Day 18
Part Samples Run: Day 20
 plastic stack tray case study

Process Stack Tray concept diagramsOur Industrial Market products represent the best in Design, Innovation, Application, compliance, and timely execution of our resources. We strive to manage and direct all of these facets while delivering high quality solutions in a very time sensitive environment. When a project needs packaging expertise, has zero room for error, and deadlines in place to keep production and planning in full swing: Our team Shines!

Recently a manufacturer of precision formed industrial products contacted us with a project, and we gladly met to discuss the details, and expectations. The project focused on an in-process tray that would hold, protect, and transport high precision parts, in a multi cavity, Stackable tray. We were told under no uncertain terms, that we had 20 Business days to design, prototype, test, tool, and deliver functional products for pilot testing.

We 1st received solid models and samples of the parts to be accommodated, and brought them into our engineering and design team. Understanding the orientation, key positioning and contact points, we were able to generate a single cavity concept for a review in two days. Some further dialog and tweaking resulted in a final design approval 5 days from our initial project discussion.

With all design and machining capabilities offered in-house, we were able to order tool material, and begin cutting tooling immediately upon receipt of design approval.

Completed tooling is set up for an initial test fit and die alignment. Material is run for engineering and quality evaluation. Completed Sample parts delivered 3 days after completion of tooling.

Tool setup completed Cavity test fit Component parts in finished tray

After 10 days, we have a completed tool ready for final trial, and set up.

Single cavity process stack tray tested for fit, orientation, part contact and protection.

We Understand!

Packaging design directly impacts: efficient manufacturing process, assembly, quality, distribution capability, sustainability and purchasing behavior. It has the power to enhance user satisfaction with the product, which in turn enhances brand preference and repeat purchases. Packaging design has a direct impact on costs and revenues in both CJK’s and our client’s operations.

Have a Packaging Problem?

Contact Us for a packaging solution. Our award winning engineering team has over 25 years of thermoforming and package design experience. We are your Trusted Solutions Provider.

Packaging Industry News & Information From CJK – June, 2015

8 Ways to Radically Increase Your Productivity

Photo Credit: Entrepreneur.com

Photo Credit: Entrepreneur.com

 

Beginnings are the most exciting and energizing times in life. If things have been in a slump for you, make some changes. Lasting success comes from making pointed shifts in your behavior on a daily basis. Click Here to read the full article.

CJK Thermoforming Solutions is ISO9001:2015 certified and is dedicated to maximizing efficiencies and productivity in all of our processes and procedures. Visit our website today to learn more about what CJK can do for you! About Us.
Continue reading

Packaging Industry News & Information From CJK – April, 2015

Sustainability: Tools to make your Sustainable Packaging Stick

Photo Credit: greenerpackage.com

Photo Credit: greenerpackage.com

 

Sustainability issues in packaging continue to generate headlines for many audiences. But if your company is like most, you’re still finding it challenging to incorporate sustainability goals into the packaging design process. Click Here to read the full article.

With growing concerns of the environment and the effects that humans have on the future of our planet’s well-being, corporations are under increased pressure and initiatives to show responsibility when it comes to the footprints that we leave behind. This is especially true when it comes to product packaging as it more often than not becomes the consumer’s responsibility to dispose of in the right way. For that reason it is important for us to make disposal options as easy as possible for the average consumer. Take a moment to visit our Sustainability Page to learn more about CJK’s efforts. Continue reading

Packaging Industry News & Information From CJK – May, 2015

Packaging: Outside the Box – 5 Packaging Considerations

Photo Credit: lineshapespace.com

Photo Credit: lineshapespace.com

So you’ve conceived, designed, prototyped, and manufactured the next Big Thing-the product that will change the world. Congratulations! But guess what? You’re not done yet. Click Here to read the full article.

More often than not packaging tends to be thought of as an additional necessary expense, but with the right expertise – that extra expense can easily be an investment in a powerful selling tool! CJK Thermoforming Solutions can help!

Continue reading

Packaging Industry News & Information from CJK – Feb. 2015

Recycling: Which one has a smaller footprint? Plastics or Alternative Materials?

Photo Credit: greenerpackage.com

Photo Credit: greenerpackage.com

How do alternative packaging materials compare with plastics when it comes to energy use and greenhouse gas emissions? Click Here to read the full article.

With growing concerns of the environment and the effects that humans have on the future of our planet’s well-being, corporations are under increased pressure and initiatives to show responsibility when it comes to the footprints that we leave behind. This is especially true when it comes to product packaging as it more often than not becomes the consumer’s responsibility to dispose of in the right way. For that reason it is important for us to make disposal options as easy as possible for the average consumer. Take a moment to visit our Sustainability Page to learn more about CJK’s efforts. Continue reading